|
The DRYAIR heating system does not simply heat. It manages and controls temperature, Relative Humidity and Dew Point, providing the ultimate low cost solution to both permanent and temporary heating situations.
The use of controlled heat on construction projects has always been considered an advantage. The DRYAIR system not only provides large volumes of hot air. It also provides heat where you want it; how you want it and at the temperature you want, without introducing additional moisture or toxic carbon monoxide fumes.
With the heat exchangers placed upto 500 ft away from the base heater, you can be sure that the working environment is safe and free from gases, and also that optimum levels of heat are efficiently transferred to the work area.
What do DRYAIR systems heat?
- Construction projects in cold or wet weather
- Temporary buildings or structures
- Structures with condensation problems
- Marquees and other outdoor events
- Projects delayed because of moisture or low temperature
- Maintenance projects
- Buildings with RH problems
- Sterile environments
- Temporary cover for failed heating systems e.g. schools, public buildings, hospitals
- Flame-free environments & chemical production sites
- Marine projects
- Sealed structures
- Buildings with mould & fungal growth
- Sports Stadia
DRYAIR UK has commissioned independent testing of its dry heat system by the CIM unit of the Sheffield Hallam University. The results of the tests clearly show how effective the DRYAIR system is in the use of high temperature and RH controls in the heating and drying of structures.
The testing programme has been independently supervised and validated by Professor Paul Lambert of Mott MacDonald consulting engineers and visiting Professor to Sheffield Hallam University - Centre for Infrastructure Management
Click on the above Sectors for Further Data
Moisture Removal in the Corrosions & Coatings Industries
The corrosions & coatings industries are two sectors, where manufacturers, surveyors, consultants & contractors have sought to improve the performance and durability of materials and their application on construction projects. |
|
The ability to apply coatings - paint, resin and adhesive - in environments where temperature, moisture and RH are outside the manufacturers’ specifications has often remained an obstacle to achieving satisfactory levels of performance. Contractors across Europe have informed Dryair of the numerous instances that have arisen, which have resulted in extensive periods of downtime, delays or the regular failure of products through the lack of ability to control either temperature, RH or dew point.
The Dryair system, used for many years to remove moisture from work areas of high RH, is a perfect solution for the coatings industry, offering on- & off-site monitoring of the drying process, in addition to real-time data recording of all aspects of the system’s operations. This is ideal for project managers, surveyors and other parties concerned.
The results can bring significant cost benefits to all parties concerned:
- downtime is virtually eliminated;
- greater adhesion and therefore less risk of coatings failure;
- temperature & RH are brought under control, where you want them, when you want them and for the period of time you require them;
- Dew point can be measured and compensated for;
- no naked flames and no noxious gases or contaminants within the area of operation;
- improved health and safety in the work environment.
|
